Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
- Place the ignition switch in the OFF position.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Disconnect the trailer brake power control module electrical connector.
- Remove the trailer brake power control module nuts (1).
- Remove the trailer brake power control module (1) from the bracket.