Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
- Position the wiring harness (1) on the rear of the steering gear.
- Connect the wiring harness connectors to the steering gear.
- Install the wiring harness retainers on the rear of the steering gear where previously noted.
- Position the wiring harness (1) on the front of the steering gear.
- Install the wiring harness retainers on the front of the steering gear where previously noted.
- Install Steering Gear Electric Belt Drive Rack and Pinion Steering Gear Replacement
NOTE:
Ensure the position and orientation of each wiring harness retainer before securing them.