FixVault
Home › Chevrolet › 2016 › Traverse LS, AWD › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Trailer Hitch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Trailer Hitch Bolts And Trailer Hitch
    GM1852429Courtesy of GENERAL MOTORS COMPANY
  1. Install the trailer hitch (1).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the trailer hitch bolts (2-4).

    Tighten 

    Tighten the bolts to 108 N.m (80 lb ft).

    3. Fig 2: Exhaust Underbody Hangers
    GM1861487Courtesy of GENERAL MOTORS COMPANY
  3. If necessary raise the exhaust system by installing the rubber insulators to the exhaust underbody hangers (1. 2, and 3).
    4. Fig 3: Trailer Wire Harness Connector And Trailer Hitch
    GM1852428Courtesy of GENERAL MOTORS COMPANY
  4. If previously removed, install the trailer wire harness connector (1) to the trailer hitch (2).
    5. Fig 4: Body Wire Harness And Trailer Wire Harness Connector
    GM1852427Courtesy of GENERAL MOTORS COMPANY
  5. Connect the body wire harness (2) to the trailer wire harness connector (1).
  6. lower the vehicle.
About FixVault