FixVault
Home › Chevrolet › 2016 › Traverse LS, AWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Reservoir Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  3. Place drain pans under the vehicle as needed.
    4. Fig 1: Power Steering Reservoir Inlet Hose And Clamp
    GM1856010Courtesy of GENERAL MOTORS COMPANY
  4. Compress the power steering reservoir inlet hose clamp (1) and disconnect the hose from the remote power steering fluid reservoir.
    5. Fig 2: Power Steering Fluid Reservoir Outlet Hose And Clamp
    GM1856009Courtesy of GENERAL MOTORS COMPANY
  5. Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the hose from the remote power steering fluid reservoir.
    6. Fig 3: Locating Power Steering Fluid Reservoir & Bolts
    GM1856562Courtesy of GENERAL MOTORS COMPANY
  6. Remove the remote power steering fluid reservoir bolts (1).
  7. Remove the remote power steering fluid reservoir (2).
About FixVault