FixVault
Home › Chevrolet › 2016 › Trax LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 30 (Fixed And MOVEABLE Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Remove the outside moisture sensor. Refer to Windshield Outside Moisture Sensor Replacement .
  3. Remove the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement (Without BTV)Remote Control Door Lock Receiver Replacement (With BTV) .
  4. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  5. Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Encore)Windshield Garnish Molding Replacement (Trax) .
  6. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Trax)Air Inlet Grille Panel Replacement (Encore) .
  7. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  9. Close the hood.
About FixVault