FixVault
Home › Chevrolet › 2016 › Volt Premier › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions › Repair Instructions › Fuel Pump Fuel Feed Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Fuel Tank Fuel Pump Module, Fuel Pump Fuel Feed Hose And Retainer
    GM4091026Courtesy of GENERAL MOTORS COMPANY
  1. Install Fuel Pump Fuel Feed Hose (2) @ Retainer (3)
  2. Remove the EN-6015  plugs from all connections.
  3. Connect Fuel Pump Fuel Feed Hose (2) @ Fuel Tank Fuel Pump Module (1). Refer to Plastic Collar Quick Connect Fitting Service 
  4. Install Fuel Tank. Refer to Fuel Tank Replacement 
  5. Connect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
  6. Cycle the ignition to run the fuel pump and check for fuel leaks.
About FixVault