FixVault
Home › Chevrolet › 2016 › Volt Premier › Repair and Diagnosis › Hybrid/Electric Powertrain › Cooling Systems › Hybrid/EV System Heating And Cooling › Repair Instructions › Drive Motor Control Module Radiator Outlet Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Drive Motor Control Module Radiator Outlet Hose Bracket Nut
    GM4091210Courtesy of GENERAL MOTORS COMPANY
  1. Install the drive motor control module radiator outlet hose (2).
  2. Install Retainer (1)
    3. CAUTION:

    Fastener Caution

  3. Drive motor control module radiator outlet hose bracket nut (3), Tighten 9 N.m (80 lb in)
    4. Fig 2: Coolant Hose And Clamp
    GM4091200Courtesy of GENERAL MOTORS COMPANY
  4. Install Coolant Hose (2)
  5. Engage Clamp (1)
  6. Install Front Wheelhouse Liner Front Wheelhouse Liner Replacement (Left Side)Front Wheelhouse Liner Replacement (Right Side)
  7. Lower the vehicle.
    8. Fig 3: Coolant Hose And Clamp
    GM4091208Courtesy of GENERAL MOTORS COMPANY
  8. Install Coolant Hose (2)
  9. Engage Clamp (1)Hose Clamp Replacement Guidelines - Spring Type
  10. Install Headlamp Headlamp Replacement
  11. Fill the cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
About FixVault