FixVault
Home › Chevrolet › 2017 › Bolt EV LT › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Current Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection 
  2. Remove Battery Battery Replacement 
    3. Fig 1: Battery Current Sensor And Connector
    GM4546923Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect Battery Current Sensor Connector (2)
  4. Remove Battery Positive and Negative Cable Ground Nut (1) @ Front Wheelhouse Panel
  5. Remove Battery Current Sensor (3) Battery Tray
    6. Fig 2: Battery Current Sensor And Cable
    GM4546924Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor when removing.

  6. Remove Battery Current Sensor (2) @ Battery Negative Cable (1)
About FixVault