FixVault
Home › Chevrolet › 2017 › Bolt EV Premier › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
    3. Fig 1: Rear Wheelhouse Liner
    GM4533721Courtesy of GENERAL MOTORS COMPANY
  3. Remove Rear Wheelhouse Liner (4)Rear Wheelhouse Liner Replacement
    4. Fig 2: Rear Wheel Speed Sensor And Bolt
    GM4514610Courtesy of GENERAL MOTORS COMPANY
  4. Remove Rear Wheel Speed Sensor Bolt (1) @Rear Brake Caliper Mount Plate
  5. Remove Rear Wheel Speed Sensor (2) @Rear Brake Caliper Mount Plate
    6. Fig 3: Rear Wheel Speed Sensor Wiring Harness
    GM4514611Courtesy of GENERAL MOTORS COMPANY
  6. Unclip Rear Wheel Speed Sensor Wiring Harness (1) @Rear Axle Mounted Bracket (2)
    7. Fig 4: Wheel Speed Sensor Wiring Harness
    GM4514612Courtesy of GENERAL MOTORS COMPANY
  7. Unclip Rear Wheel Speed Sensor Wiring Harness (1) @Underbody Rear Side Rail Mounted Bracket (2)
  8. Unclip Rear Wheel Speed Sensor Wiring Harness (1) @Rear Wheelhouse Panel Mounted Bracket (3)
    9. Fig 5: Wheel Speed Sensor Electrical Connector
    GM4514613Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect Rear Wheel Speed Sensor Electrical Connector (1) @Body Wiring Harness (2)
  10. Remove Rear Wheel Speed Sensor@Vehicle
About FixVault