Circuit/System Verification

Verify DTC P1824, P182A-P182F, P1838-P1841, P18B5-P18B9, P18BA, P18BC, P18BF, P18C0, P18C2, or P18C3 is not set.
- If any of the DTCs are set
  Refer to DTC P1824, P182A-P182F, P1838-P1841, P18B5-P18B9, P18BA, P18BC, P18BF, P18C0, P18C2, or P18C3 .
- If none of the DTCs are set
Verify that DTC P16F4 is not set.
- If the DTC is set
1. Verify the K114A Hybrid Powertrain Control Module has the latest calibration in Calibration Information.
  - If the K114A Hybrid Powertrain Control Module does not have the latest calibration, program the K114A Hybrid Powertrain Control Module.
  - If the K114A Hybrid Powertrain Control Module has the latest calibration, replace the T6 Power Inverter Module.
2. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
3. Verify the DTC does not set.
  - If the DTC sets, replace the T6 Power Inverter Module.
  - If the DTC does not set
4. All OK
- If the DTC is not set
All OK.