Installation Procedure

Fig 1: Brake Pressure Modulator Valve Bracket

Courtesy of GENERAL MOTORS COMPANY

NOTE:

A small amount of denatured alcohol may be used on the insulators to ease assembly.

Fig 2: Brake Pressure Modulator Valve Bracket Washers

Courtesy of GENERAL MOTORS COMPANY

Fig 3: Brake Pressure Modulator Valve Nuts

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Install and tighten Brake Pressure Modulator Valve Nuts (1) (Qty: 2) to 3 N.m (27 lb in)
Install Electronic Brake Control Module with Brake Pressure Modulator Valve. Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement