Wheel Bearing: Remove & Replace

Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Front	Serviced with Wheel Hub Assembly. Refer to Wheel Hub - R&R.			B
Rear,Both		3.1		B
Rear,One Side		2.1	1.0	B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,Each	Correct Rotor lateral runout by indexing or correction plate.	0.2		B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,Each	Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.	0.2		B
Combination Procedure: OIL SEAL WEAR SLEEVE: Replace:
Each		0.2		B