Removal Procedure
WARNING:
- Park the vehicle on a level surface. - Ensure the steering wheel and the front wheels are in the straight ahead position.
- Disconnect Battery Negative Cable Disconnection and Connection
- Remove Air Inlet Grille Panel Replacement
- Remove Windshield Garnish Molding Replacement
- Remove the windshield with BO-51843 cutting tool. For further information, refer to BO-51843 Cutting Tool Description and Operation
- Fit and lock BO-641 holder to windshield.
- Remove Windshield
- Cut out the adhesive tape with a knife (1) to within 1 mm (0.039 in).
- Repair any paint damage.
Using a touch-up pen to match the color of the vehicle, repair any paint damage.
- Cut off the adhesive bead on the glass pane
Cut out the adhesive tape with the knife (1) to within 1 mm (0.039 in).
WARNING:
NOTE:
A second technician is required.