Fastener Specifications (1.4L LE2)
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Engine Coolant Heater Seal |
| Engine Oil Cooler Gasket |
| Thermostat Bypass Pipe Gasket |
| Engine Coolant Thermostat Housing Gasket |
| Turbocharger Coolant Feed Pipe Fitting Gasket |
| Turbocharger Coolant Feed Pipe Gasket |
| Turbocharger Coolant Return Pipe Gasket |
| Water Outlet Gasket |
| Water Pump Gasket |
| Water Pump Housing Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Turbocharger Coolant Feed Pipe Fitting | 35 N.m (26 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Engine Coolant Fan Motor Bolt | 7.25 N.m (64 lb in) |
| Engine Coolant Fan Shroud Bolt | 5 N.m (44 lb in) |
| Engine Coolant Thermostat Housing Bolt | 10 N.m (89 lb in) |
| Engine Oil Cooler Bolt | 10 N.m (89 lb in) |
| Engine Coolant Heater | 50 N.m (37 lb ft) |
| Hood Primary Latch Bolt | 22 N.m (16 lb ft) |
| Radiator Lower Bracket Bolt | 22 N.m (16 lb ft) |
| Thermostat Bypass Pipe Bolt | 10 N.m (89 lb in) |
| Turbocharger Coolant Feed Pipe Bolt | 35 N.m (26 lb ft) |
| Turbocharger Coolant Return Pipe Bracket Bolt | 10 N.m (89 lb in) |
| Turbocharger Coolant Return Pipe Bolt | 35 N.m (26 lb ft) |
| Water Outlet Bolt | 12 N.m (106 lb in) |
| Water Pump Bolt | 25 N.m (18 lb ft) |
| Water Pump Housing Bolt | 10 N.m (89 lb in) |