FixVault
Home › Chevrolet › 2017 › Cruze LS, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions › Repair Instructions › Vacuum Pump Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: Vacuum Pump Seal
    GM3657209Courtesy of GENERAL MOTORS COMPANY
  1. Install NEW Vacuum Pump Seal (1)
    2. NOTE:

    Ensure all passages of the vacuum pump are clean and free of debris prior to installation.

  2. Install Install Vacuum Pump (2)
    3. Fig 2: Vacuum Pump, Bolts And Retainer
    GM3657208Courtesy of GENERAL MOTORS COMPANY
  3. Install Vacuum Pump Bolt (3) & Retainer (2) @Vacuum Pump (1)
    4. CAUTION:

    Refer to Fastener Caution .

  4. Vacuum Pump Bolt - Tighten 25 N.m (18 lb ft)
  5. Install Charge Air Cooler Outlet Air Hose Replacement 
  6. Connect Power Brake Booster Vacuum Pipe Replacement (1.4L LE2)
About FixVault