FixVault
Home › Chevrolet › 2017 › Express 2500 LS, 2.8L Eng VIN 1 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions › Repair Instructions › Fuel Injector Flow Rate Programming › Repair Verification

Repair Verification

  1. Install any components or connectors that have been removed or replaced during diagnosis.
  2. Perform any adjustment, programming or setup procedures that are required when a component or module is removed or replaced.
  3. Ignition OFF for 60 s.
  4. Ignition ON, engine OFF.
  5. Clear the DTCs.
  6. If the repair was related to a DTC, duplicate the Conditions for Running the DTC and use the Freeze Frame/Failure Records, if applicable, in order to verify the DTC does not reset. If the DTC resets or another DTC is present, refer to the Diagnostic Trouble Code (DTC) List - Vehicle and perform the appropriate diagnostic procedure.
About FixVault