FixVault
Home › Chevrolet › 2017 › Express 2500 LS, 2.8L Eng VIN 1 › Repair and Diagnosis › Engine Performance › System › Data Communication System › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Right Side Knee Bolster Trim Panel
    GM853308Courtesy of GENERAL MOTORS COMPANY
  1. Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
    2. Fig 2: Disconnecting Electrical Connectors From Body Control Module
    GM923655Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connectors (2) from the body control module (BCM) (1).
    3. Fig 3: Releasing Tabs Retaining BCM To Bracket
    GM923653Courtesy of GENERAL MOTORS COMPANY
  3. Release the tabs (2) retaining the BCM (1) to the bracket.
  4. Remove the BCM (1) from the vehicle.
About FixVault