FixVault
Home › Chevrolet › 2017 › SS Automatic Trans › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System And Pedestrian Protection System › Diagnostic Information and Procedures › DTC B094D or B094E: Object Detection Indicator Circuit › Circuit/System Verification

Circuit/System Verification

  1. Ignition OFF, ignition ON.
  2. Verify the side blind zone alert system indicators located in the outside rearview mirrors briefly turn ON and then OFF during the system self test when ignition is turned ON.
    • If the side blind zone alert system indicators do not briefly turn ON and OFF 

      Refer to Circuit/System Testing

    • If both side blind zone alert indicators briefly turn ON and OFF 
  3. All OK.
About FixVault