Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brake Rotor
Rotor Diameter	355.0 mm	13.98 in
Rotor Discard Thickness*	29.8 mm	1.17 in
Rotor Maximum Allowable Assembled Lateral Runout	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.5 mm	0.060 in
Rotor Maximum Allowable Thickness Variation	0.02 mm	0.0008 in
Rotor Minimum Thickness after Refinishing	30.0 mm	1.18 in
Rotor Thickness New	32.0 mm	1.26 in
Rear Brake Rotor
Rotor Diameter	360.0 mm	14.17 in
Rotor Discard Thickness*	26.0 mm	1.02 in
Rotor Maximum Allowable Assembled Lateral Runout	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.5 mm	0.060 in
Rotor Maximum Allowable Thickness Variation	0.02 mm	0.0008 in
Rotor Minimum Thickness after Refinishing	26.2 mm	1.03 in
Rotor Thickness New	28.0 mm	1.10 in
* All disc brake rotors have a minimum thickness dimension cast into them. Replace any rotor that does not meet the minimum thickness dimension.