Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Caliper Piston Dust Boot Seal |
| Caliper Piston Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Brake Shield Bolt | 9 N.m (80 lb in) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - Front | 17 N.m (13 lb ft) |
| Brake Caliper Bleeder Valve - Rear | 17-20 N.m (13-15 lb ft) |
| Brake Caliper Bolt - Front | |
|
40 N.m (30 lb ft) |
|
90 Degrees |
| Brake Caliper Bolt - Rear | 110 N.m (81 lb ft) |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |