Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Collapsible Spacer |
| Head Bearing Cup |
| Pinion Flange Seal |
| Pinion Head Bearing |
| Tail Bearing Cup |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Ring Gear To Differential Retaining Bolts | 125 N.m (92 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Differential Housing Cover to Differential Housing Retaining Bolt M14x135 (2x) | 153 N.m (113 lb ft) |
| Differential Housing Cover to Differential Housing Retaining Bolt M14x100 (2x) | 153 N.m (113 lb ft) |
| Differential Housing Cover to Differential Housing Retaining Bolt M10x1.5x75 (6x) | 53 N.m (39 lb ft) |
| Ring Gear to Differential Assembly Retaining Bolt M12 (10x) | 125 (N.m 92 lb ft) |
| Pinion Flange to Pinion Gear Retaining Nut (On Vehicle) | Record pinion drag torque before removal and torque to the same value on installation. |
| Pinion Flange to Pinion Gear Retaining Nut (Out of Vehicle) | 2.5 N.m (22 lb in) |
| Differential Fill Plug | 35 N.m (26 lb ft) |
| Differential Drain Plug | 35 N.m (26 lb ft) |
| Differential Breather Fitting | 15 N.m (11 lb ft) |
| Differential to Rear Frame Retaining Nut | 80 N.m (59 lb ft) |
| Differential to Rear Frame Retaining Bolt | 100 N.m (74 lb ft) |