FixVault
Home › Chevrolet › 2017 › SS Automatic Trans › Repair and Diagnosis › Electrical › Body Electrical › Power Outlets › Diagnostic Information and Procedures › Power Outlet Receptacle Malfunction › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, connect an appropriate device to the X80 Accessory Power Receptacle.
  2. Verify the device is powered by the X80 Accessory Power Receptacle.
    • If the device is not powered 

      Refer to Circuit/System Testing

    • If the device is powered 
  3. All OK.
About FixVault