FixVault
Home › Chevrolet › 2017 › SS Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 6.2L (LS3) - Repair Instructions › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Fuel Tank Pressure Sensor
    GM2910975Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector from the fuel tank pressure sensor (1).
  3. Pull the fuel tank pressure sensor (1) outward to remove the fuel tank pressure sensor (1) from the vapor canister.
  4. Remove and discard the fuel tank pressure sensor seal.
About FixVault