FixVault
Home › Chevrolet › 2017 › Spark ACTIV, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 25 (Data Communication System) › Diagnostic Information and Procedures › DTC C056E › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON/Vehicle In Service Mode.
  2. Verify DTC C056E is not set.
    • If DTC C056E is set 
    1. Program the device that sets the DTC.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the device that sets the DTC.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If DTC C056E is not set 
  3. All OK
About FixVault