Installation Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Install the current sensor (2) to the battery negative cable (1).
Install the current sensor (5) to the battery tray.
- Connect the wiring harness current sensor plug (4).
Install the battery negative cable (2).
- Install the battery ground cable nut (1) and tighten to 9 N.m (80 lb in).
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Close the hood.
CAUTION:
Refer to Fastener Caution .