FixVault
Home › Chevrolet › 2017 › Spark LS, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 82 (Parking Assistance Systems) › Repair Instructions › Parking Assist Control Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3137432

    Clip in the front and rear object alarm module (2) to the 3 fuse block brackets.

  2. Turn the fuse block bracket (2) up to the fixing point.
  3. Connect the 3 wiring harness plugs (1).
  4. GM3011723
    CAUTION:

    Refer to Fastener Caution .

    Install the 3 fuse block bracket nuts (2).

  5. Connect the wiring harness plug (1).
  6. GM3011724

    Install the rear seat back armrest hinge bracket (1).

  7. Install the retainer clip (2).
  8. GM2949064

    Install the quarter inner trim finish panel - left side (4). Refer to Quarter Inner Trim Finish Panel Replacement - Left Side .

About FixVault