FixVault
Home › Chevrolet › 2017 › Spark LS, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 82 (Parking Assistance Systems) › Repair Instructions › Parking Assist Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2949064

    Remove the quarter inner trim finish panel - left side (4). Refer to Quarter Inner Trim Finish Panel Replacement - Left Side .

  2. GM3011724

    Remove the retainer clip (2).

  3. Remove the rear seat back armrest hinge bracket (1).
  4. GM3011723

    Remove the 3 fuse block bracket nuts (2).

  5. Disconnect the wiring harness plug (1).
  6. GM3137424

    Turn the fuse block bracket down in a horizontal position.

  7. Disconnect the 3 wiring harness plugs (1).
  8. Unclip the front and rear object alarm module (2) from the 3 fuse block brackets.
About FixVault