FixVault
Home › Chevrolet › 2017 › Spark LS, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 10 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2028088

    Install the wheel speed sensor (1) to the vehicle.

  2. Connect the electrical connector.
  3. Install the wiring harness retainers to the frame.
  4. GM2028087

    Install the wheel speed sensor (1) to the steering knuckle.

    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the wheel speed sensor screw (2) and tighten to 6 N.m (53 lb in).
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
About FixVault