FixVault
Home › Chevrolet › 2017 › Spark LS, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 10 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. GM2028087

    Remove the wheel speed sensor screw (2) from the steering knuckle.

  4. Remove the wheel speed sensor (1).
  5. GM2028088

    Remove the wiring harness retainers from the frame.

  6. Disconnect the electrical connector.
  7. Remove wheel speed sensor (1) from the vehicle.
About FixVault