FixVault
Home › Chevrolet › 2017 › Spark LS, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 66 (Fixed And MOVEABLE Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Windshield - Install - Adhesive Installation of Stationary Windows (Windshield) Adhesive Installation of Stationary Windows (Quarter Window) 
  2. Radio Antenna Base - Install - Radio Antenna Base Replacement
  3. Windshield Outside Moisture Sensor - Install - Windshield Outside Moisture Sensor Replacement
  4. { If equipped }Front View Camera - Install - Front View Camera Replacement
  5. Inside Rearview Mirror - Install - Inside Rearview Mirror Replacement
  6. Windshield Header Finish Upper Molding - Install - Windshield Header Finish Upper Molding Replacement 
  7. Windshield Side Reveal Molding - Install[2x] - Windshield Side Reveal Molding Replacement 
  8. Windshield Side Garnish Molding - Install[2x] - Windshield Side Garnish Molding Replacement
  9. Plenum Water Deflector-Left Side - Install - Plenum Water Deflector Replacement - Left Side
  10. Plenum Water Deflector- Center - Install - Plenum Water Deflector Replacement - Center
  11. Battery Negative Cable - Connect - Battery Negative Cable Disconnection and Connection
About FixVault