Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 GMC Yukon XL, 2017 GMC Yukon, 2017 Chevrolet Tahoe, 2017 Chevrolet Suburban, and 2017 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
- Inspect the EBCM to BPMV gasket for damage and replace, if necessary.
- Install the EBCM (1) to the BPMV.
- Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
- Connect the EBCM electrical connector.
- Program the EBCM. Refer to Control Module References .
CAUTION:
Refer to Fastener Caution .