FixVault
Home › Chevrolet › 2017 › Traverse LS Base › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System And Pedestrian Protection System › Diagnostic Information and Procedures › DTC B101D (DTC set in K109 Frontview Camera Module): Electronic Control Unit Hardware › Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC B101D symptom byte 3C is not set as current.
    • If DTC B101D symptom byte 3C is set as current 

      Reprogram the K109 Frontview Camera Module

    • If DTC B101D symptom byte 3C is not set as current 
  2. Verify that DTC B101D is not set as current.
    • If DTC B101D is set as current 

      Replace the K109 Frontview Camera Module

    • If DTC B101D is not set as current 
  3. All OK.
About FixVault