Removal Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the propeller shaft assembly. Refer to Propeller Shaft Replacement .

Fig 1: Torque Tube Mounting Bolt

GM1848880

Courtesy of GENERAL MOTORS COMPANY

Remove the torque tube mounting bolt.

Fig 2: Torque Tube

GM1848899

Courtesy of GENERAL MOTORS COMPANY

NOTE:

DO NOT allow the torque tube to hang, support with a suit stand.

Lower the torque tube to gain access to the clutch control module.

Fig 3: Clutch Control Module Electrical Connectors

GM1848846

Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors from the clutch control module.

Fig 4: Clutch Control Module Screws

GM1848855

Courtesy of GENERAL MOTORS COMPANY

Remove the screws for the clutch control module.
Remove the clutch control module from the torque tube.