FixVault
Home › Chevrolet › 2017 › Traverse LS Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake › Removal Procedure

Removal Procedure

    Fig 1: Intake & Exhaust Camshaft Position (CMP) Sensors - Bank 1 (Right Side) Intake
    GM1860428Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the engine wiring harness electrical connector (1) from the bank 1 intake camshaft position (CMP) sensor (2).
    2. Fig 2: CMP Sensor Bolt & Sensor - Bank 1 (Right Side) Intake
    GM1860459Courtesy of GENERAL MOTORS COMPANY
  2. Remove the CMP sensor bolt and sensor (2).
About FixVault