FixVault
Home › Chevrolet › 2017 › Traverse LS Base › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Fluid Reservoir Outlet Hose Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  3. Place drain pans under the vehicle as needed.
    4. Fig 1: Power Steering Fluid Reservoir Outlet Hose & Clamp
    GM1856009Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the power steering fluid reservoir outlet hose (1) from the remote power steering fluid reservoir.
    5. Fig 2: Power Steering Fluid Reservoir Outlet Hose
    GM1856746Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the power steering fluid reservoir outlet hose (1) from the power steering pump.
    6. NOTE:

    Disconnect any clips as needed before attempting removal.

  6. Remove the power steering fluid reservoir outlet hose from the vehicle.
About FixVault