FixVault
Home › Chevrolet › 2017 › Trax LS, AWD › Repair and Diagnosis › Engine Performance › Ignition System › Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: Throttle Body
    GM2191968Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW throttle body seal ring (1).
  2. Position the throttle body (2).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the throttle body fasteners (3) and tighten to 8 N.m (71 lb in).
  4. Install the charge air cooler outlet air hose to the throttle body. Charge Air Cooler Outlet Air Hose Replacement 
  5. Connect the throttle body wiring harness connector.
  6. Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset 
About FixVault