FixVault
Home › Chevrolet › 2017 › Volt LT › Repair and Diagnosis › Hybrid/Electric Powertrain › Cooling Systems › Hybrid/EV System Heating And Cooling › Repair Instructions › Generator Control Module Coolant Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Generator Control Module Coolant Hose
    GM4091113Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator control module coolant hose (1).
  2. Install Clamp (2) BO-38185  pliers
  3. Install Rear Compartment Floor Stowage Trim Compartment Replacement
  4. Fill the cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
About FixVault