FixVault
Home › Chevrolet › 2017 › Volt LT › Repair and Diagnosis › Hybrid/Electric Powertrain › Cooling Systems › Hybrid/EV System Heating And Cooling › Repair Instructions › Generator Control Module Coolant Tank Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Clamp And Generator Control Module Coolant Tank Hose
    GM4091111Courtesy of GENERAL MOTORS COMPANY
  1. Install Generator Control Module Coolant Tank Hose (1).
  2. Install Clamp (2) BO-38185  pliers
  3. Install Rear Compartment Floor Stowage Trim Compartment Replacement
  4. Fill the cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
About FixVault