Circuit/System Verification

Vehicle in Service Mode.
Verify that no other DTCs are set except for C10EB.
- If any other DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other DTCs are set
Replace the K20 Engine Control Module.
Verify that DTC C10EB does not set while operating the vehicle under the Conditions for Running the DTC. You may also operate the vehicle under the conditions that you observed from the Freeze Frame/Failure Records data.
- If DTC C10EB sets
  Replace the K17 Electronic Brake Control Module.
- If DTC C10EB does not set
All OK.