FixVault
Home › Chevrolet › 2017 › Volt Premier › Repair and Diagnosis › Engine Mechanical › Exhaust System › Repair Instructions › Exhaust Muffler Replacement › Installation Procedure

Installation Procedure

    Fig 1: Intermediate Exhaust Hanger Insulator
    GM4091134Courtesy of GENERAL MOTORS COMPANY
  1. Install the rear exhaust hanger insulator (2).
    2. NOTE:

    A second technician is required.

  2. Install Exhaust Muffler (4)
  3. Install the intermediate exhaust hanger insulator (3).
    4. NOTE:

    The knob on the exhaust pipe (1) has to be in the gap of the exhaust front pipe.

  4. Align the exhaust system.
    5. Fig 2: Exhaust Muffler Insulator Bolt
    GM4091133Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  5. Install the 2 exhaust muffler insulator bolts (1) and tighten to 22 N.m (16 lb ft).
    6. Fig 3: Exhaust Pipe Clamp And Exhaust Hanger Insulator
    GM4091132Courtesy of GENERAL MOTORS COMPANY
  6. Install the exhaust hanger insulator (2).
  7. Exhaust Pipe Clamp (1) - Tighten 55 N.m (41 lb ft)
  8. Remove the support from the exhaust muffler.
  9. Lower the vehicle.
About FixVault