FixVault
Home › Chevrolet › 2017 › Volt Premier › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions › Repair Instructions › Engine Coolant Temperature Sensor Replacement - Water Outlet › Installation Procedure

Installation Procedure

    Fig 1: Engine Coolant Temperature Sensor, Electrical Connector, Retainer And Seal
    GM4091507Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW seal.(1)
  2. Install the engine coolant temperature sensor.(2)
  3. Install Engine Coolant Temperature Sensor Retainer (4)
  4. Connect the engine coolant temperature sensor electrical connector.(3)
    5. Fig 2: Heater Outlet Hose Clamp
    GM4091334Courtesy of GENERAL MOTORS COMPANY
  5. Connect Heater Outlet Hose (1)
  6. Tighten Heater Outlet Hose Clamp (2)
  7. Install Radiator Inlet Hose@Water Outlet Radiator Inlet Hose Replacement
  8. Install Heater Outlet Hose Vapor Vent Hose Replacement
  9. Fill the cooling system. Cooling System Draining and Filling
About FixVault