FixVault
Home › Chevrolet › 2017 › Volt Premier › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions › Repair Instructions › Fuel Pressure Sensor Replacement › Removal Procedure

Removal Procedure

WARNING:

Diesel/Gasoline Vapors Warning

WARNING:

Safety Goggles and Fuel Warning

  1. Relieve the fuel system pressure. Fuel Pressure Relief 
  2. Remove Underbody Front Air Deflector Replacement - Left Side
    3. Fig 1: Fuel Pressure Sensor, Seal Ring And Electrical Connector
    GM4091047Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connector.(1)
  4. Place a drain pan under the vehicle.
  5. Remove Fuel Pressure Sensor(2)
  6. Remove Seal Ring(3) and DISCARD
About FixVault