FixVault
Home › Chevrolet › 2017 › Volt Premier › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions › Repair Instructions › Fuel Tank Filler Pipe Replacement › Removal Procedure

Removal Procedure

WARNING:

Diesel/Gasoline Vapors Warning

WARNING:

Safety Goggles and Fuel Warning

  1. Disconnect Battery Negative Cable Disconnection and Connection
  2. Drain the fuel tank. Fuel Tank Draining 
  3. Remove Fuel Tank Filler Pipe Housing Replacement
    4. Fig 1: Fuel Tank Filler Pipe Bolt
    GM4091059Courtesy of GENERAL MOTORS COMPANY
  4. Remove Fuel Tank Filler Pipe Bolt (1)
  5. Raise and support the vehicle. Lifting and Jacking the Vehicle
  6. Remove Rear Wheelhouse Liner Replacement - Right Side
    7. Fig 2: Fuel Tank Filler Pipe Ground Bolt And Wiring Harness Clip
    GM4091061Courtesy of GENERAL MOTORS COMPANY
  7. Remove Fuel Tank Filler Pipe Ground Bolt (1)
  8. Remove Wiring Harness Clip (2)
    9. Fig 3: Evaporative Emission System Vacuum Leak Pump Filter Pipe, Fuel Tank Filler Hose, Vent Pipe, Clamp And Retainer
    GM4091060Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect the evaporative emission system vacuum leak pump filter pipe (6). Refer to Plastic Collar Quick Connect Fitting Service .
  10. Close all open connections with the EN-6015  plugs.
  11. Disconnect the fuel tank vent pipe (3). Refer to Plastic Collar Quick Connect Fitting Service .
  12. Close all open connections with the EN-6015  plugs.
  13. Loosen the clamp.(4)
  14. Remove Retainer (1)
    15. Fig 4: Fuel Tank Filler Pipe
    GM4091062Courtesy of GENERAL MOTORS COMPANY
  15. Fuel Tank Filler Pipe (1)
About FixVault