FixVault
Home › Chevrolet › 2017 › Volt Premier › Repair and Diagnosis › Hybrid/Electric Powertrain › Cooling Systems › Hybrid/EV System Heating And Cooling › Repair Instructions › Drive Motor Generator Control Module Cooling Outlet Hose Replacement (Underbody Line) › Installation Procedure

Installation Procedure

    Fig 1: Drive Motor Generator Control Module Cooling Outlet Hose
    GM4091198Courtesy of GENERAL MOTORS COMPANY
  1. Install Drive Motor Generator Control Module Cooling Outlet Hose (2)
  2. Install Retainer (1)
    3. Fig 2: Drive Motor Generator Control Module Cooling Outlet Hose And Nut
    GM4091197Courtesy of GENERAL MOTORS COMPANY
  3. Install Retainer(2)
    4. CAUTION:

    Fastener Caution

  4. Install Drive Motor Generator Control Module Cooling Outlet Hose Nut (1) and tighten 9 N.m (80 lb in)
    5. Fig 3: Coolant Hose And Clamp
    GM4091196Courtesy of GENERAL MOTORS COMPANY
  5. Install Coolant Hose (2)
  6. Install Clamp (1)BO-38185  pliers
    7. Fig 4: Drive Motor Generator Control Module Cooling Outlet Hose And Nut
    GM4091195Courtesy of GENERAL MOTORS COMPANY
  7. Install Drive Motor Generator Control Module Cooling Outlet Hose Nut (1) and tighten 9 N.m (80 lb in)
    8. Fig 5: Coolant Hose And Clamp
    GM4091200Courtesy of GENERAL MOTORS COMPANY
  8. Install Coolant Hose (2)
  9. Install Clamp (1)
    10. Fig 6: Retainer
    GM4091201Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Install the wiring harness.

  10. Install Drive Motor Generator Control Module Cooling Outlet Hose Nut (1) and tighten 90 N.m (80 lb in)
  11. Install Retainer(2, 3)
    12. Fig 7: Coolant Hose And Clamp
    GM4091181Courtesy of GENERAL MOTORS COMPANY
  12. Install Coolant Hose (1)
  13. Install Clamp(2)
  14. Install Front Wheel Drive Shaft Replacement
  15. Install Drivetrain and Front Suspension Cradle Replacement
  16. Install Front Wheelhouse Liner Replacement (Left Side)Front Wheelhouse Liner Replacement (Right Side)
  17. Install the floor panel number 4 cross bar. Floor Panel Number 4 Cross Bar Replacement
  18. Lower the vehicle.
  19. Fill the cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
About FixVault