FixVault
Home › Chevrolet › 2018 › Corvette Z06, 2D Convertible, Automatic Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Data Communication System - Repair Instructions › Repair Instructions › Body Control Module Bracket Replacement

Body Control Module Bracket Replacement

GM4644782
Callout Component Name

Preliminary Procedures

  1. Body Control Module Replacement 
  2. Blower Motor Replacement
1 Body Control Module Bracket Nut[3x]
CAUTION:

Fastener Caution


Procedure 
Unclip and reposition the 6 wiring harness retainers.
Tighten 
9 N.m (80 lb in)
2 Body Control Module Bracket

Procedure

  1. Release the radio receiver from the body control module bracket.
  2. Remove the bracket from vehicle by repositioning bulkhead insulator panel as necessary.
  3. Pull downward and reposition the wiring harnesses as necessary to remove bracket from vehicle.
About FixVault