Manifold Absolute Pressure Sensor Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the upper intake manifold cover. Refer to Upper Intake Manifold Cover Replacement . |
|
| 1 | Manifold Absolute Pressure Sensor Fastener
CAUTION:
Refer to Fastener Caution . Tighten 4.5 N.m (40 lb in) |
| 2 | Manifold Absolute Pressure Sensor Procedure Disconnect the electrical connector from the manifold absolute pressure sensor. |
| 3 | Manifold Absolute Pressure Sensor Seal
NOTE:
Always install the NEW seal supplied with the sensor. |