FixVault
Home › Chevrolet › 2018 › Cruze LS, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions › Repair Instructions › Fuel Pressure Sensor Replacement - Fuel Feed Pipe › Installation Procedure

Installation Procedure

  1. GM4091454

    Install the fuel tank fuel feed pipe (4) to the fuel tank bracket (5) and the fuel pressure sensor clip (3).

  2. Connect the electrical connector.(2)
  3. Remove the EN-6015  plugs from all connections.
  4. Connect the fuel tank fuel feed pipe (4) to the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Fuel Tank Replacement  - Install
  6. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
About FixVault