FixVault
Home › Chevrolet › 2018 › Cruze LS, Automatic Trans › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C055C › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC C055C is not set.
    • If the DTC is set 
    1. Verify that no steering components down stream of the power steering column assembly are mechanically binding. Refer to Increase in Effort While Turning Steering Wheel 
      • If steering components are mechanically binding, replace the mechanically binding steering components.
      • If no steering components are mechanically binding, replace the steering gear.
    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault