FixVault
Home › Chevrolet › 2018 › Cruze LS, Automatic Trans › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Linkage Inner Tie Rod Replacement › Installation Procedure

Installation Procedure

  1. GM4297829

    CH-6321  installer (2)@Steering Linkage Inner Tie Rod(1) - Install.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Steering Linkage Inner Tie Rod(1) - Tighten 85 N.m (63 lb ft)
  3. GM4297828

    Install the spacer (2) to the steering linkage inner tie rod (1).

  4. Steering Gear Boot Replacement  - Install
  5. Wheel Alignment Measurement
  6. Steering Wheel Angle Sensor Centering - Adjust
About FixVault