FixVault
Home › Chevrolet › 2018 › Cruze LS, Automatic Trans › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Turn Signal Switch Bracket Replacement › Installation Procedure

Installation Procedure

  1. GM3701748

    Turn Signal Switch Bracket(1)@Steering Column(2) - Install - Install until the tabs snap in

  2. GM3701747
    CAUTION:

    Fastener Caution

    Bolt(2)@Turn Signal Switch Bracket(1) - Install and tighten[2x] 2.35 N.m (21 lb in)

  3. GM3701746

    Theft Deterrent Module(1) - Install

  4. Bolt(2) - Install and tighten [2x] 0.8 N.m (7 lb in)
  5. Windshield Wiper and Washer Switch Replacement - Install
  6. Turn Signal Switch Replacement  - Install
  7. Steering Wheel Airbag Coil Replacement - Install
  8. Steering Column Lower Trim Cover Replacement  - Install
  9. Steering Column Upper Trim Cover Replacement  - Install
  10. Steering Wheel Replacement  - Install
About FixVault